one more thing i found
http://www.bba-reman.com/bmwabsfaults.htm
can my 94 325i be affected by this
ABS WARNING LIGHT ON
MODELS AFFECTED: 3 series (E36) and Z3 produced up to 5/96
FAULT: The ABS warning lamp is on in the instrument cluster, and fault code 145 (pump inoperable)
stored in the ABS control module memory.
CAUSE: Faulty relays produced prior to may 1996.
SOLUTION: Use the DIS tester to confirm that fault code 145 is set in the ABS control unit. Work
through test instructions in DIS confirm that the fault is not caused by any other components. Then
replace the gray ABS pump motor relay, witch is located in the power distribution box, rear left side
of engine compartment.
and one more question, can i check the fault code from the OBC?