Adding Sidemarker Lights?

[Capt]

Is it possible/feasible to add sidemarker lights to a '94 325ic without them? If so, what is the best method? Are there kits or am I looking at bridging off another circuit?

Thanks for the info.

 

[ra328i]

you'll first have to cut a hole in your bm. this in itself is heart wrenching to do. then you'll have to run a wire to your corner lights. this can be run underneath the fender of your car. i used a clothes hangar to push the wires through. i highly recommend that you use a dremmel tool to cut. do not use anything else!!! nothing can cut cleaner in my opinion. but i just wanted to let you know that it's possible... i used to own a 92 325 that i added side markers too.

 

[BigEarl325is]

It's possible but they don't sell kits. They do however sell everything you need in bits and pieces. I would HIGHLY suggest hiring something like this out if you're not confident in your ability. Any reliable body shop can do it.

 

[Kenny2g]

And i would strongly suggest not to PUT A HOLE on your Bimmer. I just can't do that.

 

[Capt]

No holes in the bimmer

I just don't think I could cut two holes in my bimmer. I may just 3m tape two lights on her for the look without the function. I appreciate the replys guys.