So here is the problem. I have to get a smog check before the 25th and am going to have it done tomorrow. Last time that I had a smog check I barely passed for hydrocarbon emmisions (48 out of a possible 50 I think). Is there any way that I could minimize this for this test? It willbe a huge problem if I don't pass this check since I am in college right now in the middle of midterm week. Thanks in advance for any tips!!!
Help! Smog Check Tomorrow!!!
- Thread starter bigdavid1001
- Start date
I totally agree with the idea that the emissions should be as low as possible. If the style of driving doesn't allow the car to completely warm up, ie stop and go, city type driving, a good run occasionally will kinda "clean it out". The benefits are usually a better, cleaner running car, and pollution numbers should be reduced..good luck with the test...
I did everything that you guys suggested except for the 92 gas ( I already had it full with 89) but...I failed the test. ![[bigcry]](/images/smilies/icon_smile_bigcry.gif "Big Cry [bigcry]")
I did fine in the 15 mph test but at 25 mph I had a HC emmision of 67 ( 50 is max). The guy said that it might be faulty connections but that it probably isn't the O2 sensor since my NO were alright??? I am having it checked by the local BMW shop. Is there any things other than those already stated that I should have the mechanic look at? THANKS FOR THE HELP!!
I did fine in the 15 mph test but at 25 mph I had a HC emmision of 67 ( 50 is max). The guy said that it might be faulty connections but that it probably isn't the O2 sensor since my NO were alright??? I am having it checked by the local BMW shop. Is there any things other than those already stated that I should have the mechanic look at? THANKS FOR THE HELP!!
That's almost 1 1/2 times the acceptable limit, that car should be taken to the junkyard!
BTW, it isn't our fault your car failed the inspection. If you really cared about obeying the law and taking care of your car you would have properly maintained it and gotten it fixed in time. On a second thought, I retract my statement I hope it does not foreshadow your final exams, take care.
BTW, it isn't our fault your car failed the inspection. If you really cared about obeying the law and taking care of your car you would have properly maintained it and gotten it fixed in time. On a second thought, I retract my statement I hope it does not foreshadow your final exams, take care.
Just to clear things up... I bought the car about 2 years ago with 80,000 miles on the dial. I thought that it had been treated really well since it had only been driven 15,000 miles in the last 4 years (older lady owner). So, once I found out that it had barely passed the smog test the first time, 2 years ago, I was really angry that I had overpaid (out of my own money from 4 summers of solid work) for this "bavarian hotrod." So for all of you who think that I could possibly mistreat the car you are totally wrong (I have religiously changed the oil myself every 3,500 miles since I bought it). Thanks to everyone who didn't make a snap judgement about the situation and actually tried to help me out of this hole. For those pessimists who go online and try to give others a hard time... get a f'in life. I'm sorry but my mommy and daddy aren't there for me to pay for getting the car "fixed the right way" like some immature people on the forum propose. The only reason why I come to this board instead of others is because of the kind, helpful people who GENERALLY post. Today I learned that there are still a few bad apples that would ruin the forums here at hotbimmer.net. Thats my rant so you can now carry on with you wonderfully perfect BMW lives.
Then go buy a reliable Corolla or Civic next time, if you can't afford to maintain the BMW 325i then you shouldn't have gotten it in first place. If anyone is immature it would be the individual using masked vulgularity. Cars that can't pass the emissions inspection shouldn't be on the road period, the environment will thank you some day. I think your time would be better spent studying for your finals which were seemingly so important, as opposed to ranting on a forum.
The general cause of high HC is running rich (too much fuel in the air/fuel mix). This is most frequently caused by a tired 02 sensor. That is the best place to start.
From our sponsor Autohausaz.com
Auto Repair #10:
Oxygen Sensors Are a Critical Key to Passing Emissions
Automotive exhaust emissions are everyone's concern because we all breathe the same air. Fifty percent of Americans live in areas that exceed national clean air standards. Reducing tailpipe emissions, therefore, is a top priority in the effort to fight air pollution.
In 1976, Bosch introduced what would eventually become one of THE most important technologies for reducing exhaust emissions: the oxygen sensor. By 1996, Bosch had produced its 100,000,000th oxygen sensor.
Today, Bosch oxygen sensors are original equipment on a wide variety of European, Asian and domestic vehicles and are the #1 best selling brand in the aftermarket.
Oxygen sensors have been standard equipment on passenger car and light truck engines since 1980-81. Most such vehicles have one or two oxygen sensors (two are typically used on selected V6 and V8 engines starting in the late 1980s). Since the introduction of Onboard Diagnostics II (OBD II) in 1995-96, the number of oxygen sensors per vehicle has doubled (the extra sensors are used downstream of the catalytic converter to monitor its operating efficiency).
Yet, as important as oxygen sensors are today, few people are even aware of their presence, let alone the key role oxygen sensors play in engine performance and reducing pollution. One survey found that 99.7% of all consumers did not know their vehicle even had an oxygen sensor!
How the Oxygen Sensor Fights Pollution
Originally called a "Lambda Sensor" when it was first used in fuel-injected European cars, the oxygen sensor monitors the level of oxygen (O2) in the exhaust so an onboard computer can regulate the air/fuel mixture to reduce emissions. The sensor is mounted in the exhaust manifold downpipe(s) before the catalytic converter or between the exhaust manifold(s) and the catalytic converter(s). It generates a voltage signal proportional to the amount of oxygen in the exhaust.
The sensing element on nearly all oxygen sensors in use is a zirconium ceramic bulb coated on both sides with a thin layer of platinum. The outside of the bulb is exposed to the hot exhaust gases, while the inside of the bulb is vented internally through the sensor body or wiring to the outside atmosphere.
When the air/fuel mixture is rich and there is little O2 in the exhaust, the difference in oxygen levels across the sensing element generates a voltage through the sensor's platinum electrodes: typically 0.8 to 0.9 volts. When the air/fuel mixture is lean and there is more oxygen in the exhaust, the sensor's voltage output drops to 0.1 to 0.3 volts. When the air/fuel mixture is perfectly balanced and combustion is cleanest, the sensor's output voltage is around 0.45 volts.
The oxygen sensor's voltage signal is monitored by the onboard engine management computer to regulate the fuel mixture. When the computer sees a rich signal (high voltage) from the oxygen sensor, it commands the fuel mixture to go lean. When it receives a lean signal (low voltage) from the oxygen sensor, it commands the fuel mixture to go rich. Cycling back and forth from rich to lean averages out the overall air/fuel mixture to minimize emissions and to help the catalytic converter operate at peak efficiency, which is necessary to reduce hydrocarbon (HC), carbon monoxide (CO) and oxides of nitrogen (NOX) levels even further.
The speed with which the oxygen sensor reacts to oxygen changes in the exhaust is very important for accurate fuel control, peak fuel economy and low emissions. The air/fuel mixture in an older carbureted engine doesn't change as quickly as that in a throttle body fuel-injected vehicle, so response time is less critical. But, in new engines with multipoint fuel injection, the air/fuel mixture can change extremely fast, requiring a very quick response from the oxygen sensor.
Oxygen Sensors Don't Last Forever
Here's What Happens As They Age
As an oxygen sensor ages, contaminants from normal combustion and oil ash accumulate on the sensing element. This reduces the sensor's ability to respond quickly to changes in the air/fuel mixture. The sensor slows down and becomes "sluggish".
At the same time, the sensor's output voltage may not be as high as it once was, giving the false impression that the air/fuel mixture is leaner than it actually is. The result can be a richer-than-normal air/fuel mixture under various operating conditions that causes fuel consumption and emissions to rise.
The problem may not be noticed right away because the change in performance occurs gradually. But, over time, the situation will get worse, ultimately requiring the sensor to be replaced to restore peak engine performance.
Oxygen Sensor Failures Can Mean
Big $$ In Repairs If Not Replaced
The normal aging process will eventually cause the oxygen sensor to fail. However, the sensor may also fail prematurely if it becomes contaminated with lead from leaded gasoline, phosphorus from excessive oil consumption or silicone from internal coolant leaks or using silicone sprays or gasket sealers on the engine. Environmental factors such as road splash, salt, oil and dirt can also cause a sensor to fail, as can mechanical stress or mishandling.
A dead sensor will prevent the onboard computer from making the necessary air/fuel corrections, causing the air/fuel mixture to run rich in the "open loop" mode of operation, resulting in much higher fuel consumption and emissions.
An additional consequence of any oxygen sensor failure may be damage to the catalytic converter. A rich operating condition causes the converter to run hotter than normal. If the converter gets hot enough, the catalyst substrate inside may actually melt forming a partial or complete blockage. The result can be a drastic drop in highway performance or stalling because of a buildup of backpressure in the exhaust system.
Do YOU Know When It's Time To
Replace YOUR Oxygen Sensor?
Although some cars have an oxygen sensor "reminder" light to alert you when it is time to check the oxygen sensor, most do not. So, unless there's a noticeable driveability problem or a "Check Engine" light on, most people have no way of knowing if their oxygen sensor is functioning properly or not.
The growth of emissions testing nationwide is changing that, along with the introduction of new "enhanced" emissions testing programs that simulate real world driving conditions while emissions are being measured. The latter is proving to be very effective at catching emission problems that formerly escaped detection. Great! So you'll find out your oxygen sensor is bad only when you flunk your emissions test! Nice to know, huh?
According to a study conducted by Sierra Research, Inc., in 1996, oxygen sensor failure is the "single greatest source of excessive emissions for fuel-injected vehicles" and the second most significant cause of high emissions in carbureted engines.
The U.S. Environmental Protection Agency (EPA) and the California Air Resources Board (CARB) have found that oxygen sensor replacement was required on 42%-58% of all vehicles that were subjected to an emissions check and were found to be emitting high levels of hydrocarbons (HC) or carbon monoxide (CO). Checking the operation of the oxygen sensor and feedback control system, therefore, should always be a priority anytime a vehicle fails an emissions test due to high HC or CO.
Oxygen sensor performance can be checked by reading the sensor's output voltage to make sure it corresponds with the air/fuel mixture (low when lean, high when rich). The voltage signal can also be displayed as a wave form on an oscilloscope to make sure the signal is changing back and forth from rich to lean and is responding quickly enough to changes in the air/fuel ratio.
Don't Wait For Failure
Replace Your Oxygen Sensor as Normal Preventive Maintenance
To minimize the consequences of normal aging, Bosch recommends oxygen sensor replacement for preventive maintenance at the following intervals:
Type of Car
Mileage Replacement Interval Recommended
Unheated oxygen sensors on 1976 to early 1990s vehicles
Every 30,000 - 50,000 miles
Heated (1st generation) oxygen sensors on mid-1980s to mid-1990s vehicles
Every 60,000 miles
Heated (2nd generation) oxygen sensors on mid-1990s and newer vehicles
Every 100,000 miles
Keeping the oxygen sensor fresh may improve fuel economy as much as 10%-15% (which can save $100 each year in fuel costs on average). Keeping the oxygen sensor in good operating condition will also minimize exhaust emissions, reduce the risk of costly damage to the catalytic converter and ensure peak engine performance (no surging or hesitating).
For these reasons, the oxygen sensor should be considered a "tune-up" replacement item just like spark plugs, especially on older vehicles (those built before the mid-1990s).
Bosch Oxygen Sensors
Your Only REAL Choice to Avoid Problems
Bosch oxygen sensors are an exact replacement for the original (OEM/OES). The construction, number of wires and connectors are the same as the OE, which eliminates the risks associated with splicing and crimping wires (required for many "universal" replacement oxygen sensors).
Some three- or four-wire universal oxygen sensors also do not have the same heater circuit watt ratings as the OE sensor, which may cause driveability and emissions problems. There is also a potential for damaging the computer and/or oxygen sensor if a multiwire universal sensor is connected incorrectly. The lack of standardization of wire colors increases the risk of an incorrect installation.
So, when it comes time to replace your import car's oxygen sensor, there's no question that you'll get the best fit and performance from the OE oxygen sensors built by Bosch.
Bosch Oxygen Sensors - help you reduce emissions on your import car!
A Few Important Things to Remember
Heed these tips and you're well on your way to passing emissions with flying colors and saving money in fuel costs and repair bills:
Tip #1: Increased fuel consumption, driveability problems (hesitation or surging), "Check Engine Light" lit or emissions test failure could all be signs of an oxygen sensor in need of replacement.
Tip #2: An additional consequence of any oxygen sensor failure may be damage to your car's catalytic converter - a very expensive way to find out your oxygen sensor needs replacement!
Tip #3: Checking the operation of the oxygen sensor and feedback control system should always be a priority anytime a vehicle fails an emissions test due to high HC or CO.
Tip #4: Keeping your oxygen sensor(s) fresh may improve fuel economy as much as 10%-15% (which can save $100 each year in fuel costs on average). Keeping the sensor in good operating condition will also minimize exhaust emissions, reduce the risk of costly damage to the catalytic converter and ensure peak engine performance (no surging or hesitating).
Tip #5 - Thanks to Tom C. For Pointing This One Out: The oxygen sensor operates in an extremely hostile environment. Like a spark plug, it is threaded and screws into its mounting location. Normally the O2 sensor is supplied with anti-seize compound on the threads so it can be more easily removed at the specified change interval. Over time, the anti-seize compound loses its effectiveness and the sensor can become "welded" into its location, making it nearly impossible to remove using normal tools. Using excessive force to remove the oxygen sensor may damage the sensor and surrounding components. If the sensor becomes seized in its mounting location, a simple 15 minute replacement job can become a much more complex and difficult task. Replacing the O2 sensor within the specified change interval will minimize the possibility of this problem and additional component damage. Bear in mind: A non-functional or visibly damaged oxygen sensor may cause you to fail an emissions test if you live in an area that requires regular emissions testing.
Your Emissions System Maintenance Shopping List
Here is a list of emissions parts to look at if you have problems passing your local emissions tests:
- Oxygen Sensor -
- Seals in your Exhaust System -
- Air/Vacuum Leaks -
- Fuel Injectors -
- Fuel Pressure Regulator -
- Temp Sensors -
- Idle Control Valve -
- Idle Speed Relay -
- Air Filter -
- Fuel Filter -
- Distributor Cap -
- Distributor Rotor -
- Ignition Wire Set (Spark Plug Wire Set) -
- Spark Plugs -
- Catalytic Converter -
Don't Forget:
Repair articles are added regularly.
Come back often to check for new maintenance topics.
These repair tips are designed only as a starting point.
Please seek the assistance of a professional mechanic
for all repair problems beyond your capabilities.
Return To Gasoline Alley For More Repair Tips
Need Import Auto Parts? Click Here to Shop for Parts
From our sponsor Autohausaz.com
Auto Repair #10:
Oxygen Sensors Are a Critical Key to Passing Emissions
Automotive exhaust emissions are everyone's concern because we all breathe the same air. Fifty percent of Americans live in areas that exceed national clean air standards. Reducing tailpipe emissions, therefore, is a top priority in the effort to fight air pollution.
In 1976, Bosch introduced what would eventually become one of THE most important technologies for reducing exhaust emissions: the oxygen sensor. By 1996, Bosch had produced its 100,000,000th oxygen sensor.
Today, Bosch oxygen sensors are original equipment on a wide variety of European, Asian and domestic vehicles and are the #1 best selling brand in the aftermarket.
Oxygen sensors have been standard equipment on passenger car and light truck engines since 1980-81. Most such vehicles have one or two oxygen sensors (two are typically used on selected V6 and V8 engines starting in the late 1980s). Since the introduction of Onboard Diagnostics II (OBD II) in 1995-96, the number of oxygen sensors per vehicle has doubled (the extra sensors are used downstream of the catalytic converter to monitor its operating efficiency).
Yet, as important as oxygen sensors are today, few people are even aware of their presence, let alone the key role oxygen sensors play in engine performance and reducing pollution. One survey found that 99.7% of all consumers did not know their vehicle even had an oxygen sensor!
How the Oxygen Sensor Fights Pollution
Originally called a "Lambda Sensor" when it was first used in fuel-injected European cars, the oxygen sensor monitors the level of oxygen (O2) in the exhaust so an onboard computer can regulate the air/fuel mixture to reduce emissions. The sensor is mounted in the exhaust manifold downpipe(s) before the catalytic converter or between the exhaust manifold(s) and the catalytic converter(s). It generates a voltage signal proportional to the amount of oxygen in the exhaust.
The sensing element on nearly all oxygen sensors in use is a zirconium ceramic bulb coated on both sides with a thin layer of platinum. The outside of the bulb is exposed to the hot exhaust gases, while the inside of the bulb is vented internally through the sensor body or wiring to the outside atmosphere.
When the air/fuel mixture is rich and there is little O2 in the exhaust, the difference in oxygen levels across the sensing element generates a voltage through the sensor's platinum electrodes: typically 0.8 to 0.9 volts. When the air/fuel mixture is lean and there is more oxygen in the exhaust, the sensor's voltage output drops to 0.1 to 0.3 volts. When the air/fuel mixture is perfectly balanced and combustion is cleanest, the sensor's output voltage is around 0.45 volts.
The oxygen sensor's voltage signal is monitored by the onboard engine management computer to regulate the fuel mixture. When the computer sees a rich signal (high voltage) from the oxygen sensor, it commands the fuel mixture to go lean. When it receives a lean signal (low voltage) from the oxygen sensor, it commands the fuel mixture to go rich. Cycling back and forth from rich to lean averages out the overall air/fuel mixture to minimize emissions and to help the catalytic converter operate at peak efficiency, which is necessary to reduce hydrocarbon (HC), carbon monoxide (CO) and oxides of nitrogen (NOX) levels even further.
The speed with which the oxygen sensor reacts to oxygen changes in the exhaust is very important for accurate fuel control, peak fuel economy and low emissions. The air/fuel mixture in an older carbureted engine doesn't change as quickly as that in a throttle body fuel-injected vehicle, so response time is less critical. But, in new engines with multipoint fuel injection, the air/fuel mixture can change extremely fast, requiring a very quick response from the oxygen sensor.
Oxygen Sensors Don't Last Forever
Here's What Happens As They Age
As an oxygen sensor ages, contaminants from normal combustion and oil ash accumulate on the sensing element. This reduces the sensor's ability to respond quickly to changes in the air/fuel mixture. The sensor slows down and becomes "sluggish".
At the same time, the sensor's output voltage may not be as high as it once was, giving the false impression that the air/fuel mixture is leaner than it actually is. The result can be a richer-than-normal air/fuel mixture under various operating conditions that causes fuel consumption and emissions to rise.
The problem may not be noticed right away because the change in performance occurs gradually. But, over time, the situation will get worse, ultimately requiring the sensor to be replaced to restore peak engine performance.
Oxygen Sensor Failures Can Mean
Big $$ In Repairs If Not Replaced
The normal aging process will eventually cause the oxygen sensor to fail. However, the sensor may also fail prematurely if it becomes contaminated with lead from leaded gasoline, phosphorus from excessive oil consumption or silicone from internal coolant leaks or using silicone sprays or gasket sealers on the engine. Environmental factors such as road splash, salt, oil and dirt can also cause a sensor to fail, as can mechanical stress or mishandling.
A dead sensor will prevent the onboard computer from making the necessary air/fuel corrections, causing the air/fuel mixture to run rich in the "open loop" mode of operation, resulting in much higher fuel consumption and emissions.
An additional consequence of any oxygen sensor failure may be damage to the catalytic converter. A rich operating condition causes the converter to run hotter than normal. If the converter gets hot enough, the catalyst substrate inside may actually melt forming a partial or complete blockage. The result can be a drastic drop in highway performance or stalling because of a buildup of backpressure in the exhaust system.
Do YOU Know When It's Time To
Replace YOUR Oxygen Sensor?
Although some cars have an oxygen sensor "reminder" light to alert you when it is time to check the oxygen sensor, most do not. So, unless there's a noticeable driveability problem or a "Check Engine" light on, most people have no way of knowing if their oxygen sensor is functioning properly or not.
The growth of emissions testing nationwide is changing that, along with the introduction of new "enhanced" emissions testing programs that simulate real world driving conditions while emissions are being measured. The latter is proving to be very effective at catching emission problems that formerly escaped detection. Great! So you'll find out your oxygen sensor is bad only when you flunk your emissions test! Nice to know, huh?
According to a study conducted by Sierra Research, Inc., in 1996, oxygen sensor failure is the "single greatest source of excessive emissions for fuel-injected vehicles" and the second most significant cause of high emissions in carbureted engines.
The U.S. Environmental Protection Agency (EPA) and the California Air Resources Board (CARB) have found that oxygen sensor replacement was required on 42%-58% of all vehicles that were subjected to an emissions check and were found to be emitting high levels of hydrocarbons (HC) or carbon monoxide (CO). Checking the operation of the oxygen sensor and feedback control system, therefore, should always be a priority anytime a vehicle fails an emissions test due to high HC or CO.
Oxygen sensor performance can be checked by reading the sensor's output voltage to make sure it corresponds with the air/fuel mixture (low when lean, high when rich). The voltage signal can also be displayed as a wave form on an oscilloscope to make sure the signal is changing back and forth from rich to lean and is responding quickly enough to changes in the air/fuel ratio.
Don't Wait For Failure
Replace Your Oxygen Sensor as Normal Preventive Maintenance
To minimize the consequences of normal aging, Bosch recommends oxygen sensor replacement for preventive maintenance at the following intervals:
Type of Car
Mileage Replacement Interval Recommended
Unheated oxygen sensors on 1976 to early 1990s vehicles
Every 30,000 - 50,000 miles
Heated (1st generation) oxygen sensors on mid-1980s to mid-1990s vehicles
Every 60,000 miles
Heated (2nd generation) oxygen sensors on mid-1990s and newer vehicles
Every 100,000 miles
Keeping the oxygen sensor fresh may improve fuel economy as much as 10%-15% (which can save $100 each year in fuel costs on average). Keeping the oxygen sensor in good operating condition will also minimize exhaust emissions, reduce the risk of costly damage to the catalytic converter and ensure peak engine performance (no surging or hesitating).
For these reasons, the oxygen sensor should be considered a "tune-up" replacement item just like spark plugs, especially on older vehicles (those built before the mid-1990s).
Bosch Oxygen Sensors
Your Only REAL Choice to Avoid Problems
Bosch oxygen sensors are an exact replacement for the original (OEM/OES). The construction, number of wires and connectors are the same as the OE, which eliminates the risks associated with splicing and crimping wires (required for many "universal" replacement oxygen sensors).
Some three- or four-wire universal oxygen sensors also do not have the same heater circuit watt ratings as the OE sensor, which may cause driveability and emissions problems. There is also a potential for damaging the computer and/or oxygen sensor if a multiwire universal sensor is connected incorrectly. The lack of standardization of wire colors increases the risk of an incorrect installation.
So, when it comes time to replace your import car's oxygen sensor, there's no question that you'll get the best fit and performance from the OE oxygen sensors built by Bosch.
Bosch Oxygen Sensors - help you reduce emissions on your import car!
A Few Important Things to Remember
Heed these tips and you're well on your way to passing emissions with flying colors and saving money in fuel costs and repair bills:
Tip #1: Increased fuel consumption, driveability problems (hesitation or surging), "Check Engine Light" lit or emissions test failure could all be signs of an oxygen sensor in need of replacement.
Tip #2: An additional consequence of any oxygen sensor failure may be damage to your car's catalytic converter - a very expensive way to find out your oxygen sensor needs replacement!
Tip #3: Checking the operation of the oxygen sensor and feedback control system should always be a priority anytime a vehicle fails an emissions test due to high HC or CO.
Tip #4: Keeping your oxygen sensor(s) fresh may improve fuel economy as much as 10%-15% (which can save $100 each year in fuel costs on average). Keeping the sensor in good operating condition will also minimize exhaust emissions, reduce the risk of costly damage to the catalytic converter and ensure peak engine performance (no surging or hesitating).
Tip #5 - Thanks to Tom C. For Pointing This One Out: The oxygen sensor operates in an extremely hostile environment. Like a spark plug, it is threaded and screws into its mounting location. Normally the O2 sensor is supplied with anti-seize compound on the threads so it can be more easily removed at the specified change interval. Over time, the anti-seize compound loses its effectiveness and the sensor can become "welded" into its location, making it nearly impossible to remove using normal tools. Using excessive force to remove the oxygen sensor may damage the sensor and surrounding components. If the sensor becomes seized in its mounting location, a simple 15 minute replacement job can become a much more complex and difficult task. Replacing the O2 sensor within the specified change interval will minimize the possibility of this problem and additional component damage. Bear in mind: A non-functional or visibly damaged oxygen sensor may cause you to fail an emissions test if you live in an area that requires regular emissions testing.
Your Emissions System Maintenance Shopping List
Here is a list of emissions parts to look at if you have problems passing your local emissions tests:
- Oxygen Sensor -
- Seals in your Exhaust System -
- Air/Vacuum Leaks -
- Fuel Injectors -
- Fuel Pressure Regulator -
- Temp Sensors -
- Idle Control Valve -
- Idle Speed Relay -
- Air Filter -
- Fuel Filter -
- Distributor Cap -
- Distributor Rotor -
- Ignition Wire Set (Spark Plug Wire Set) -
- Spark Plugs -
- Catalytic Converter -
Don't Forget:
Repair articles are added regularly.
Come back often to check for new maintenance topics.
These repair tips are designed only as a starting point.
Please seek the assistance of a professional mechanic
for all repair problems beyond your capabilities.
Return To Gasoline Alley For More Repair Tips
Need Import Auto Parts? Click Here to Shop for Parts
![[thumb]](/images/smilies/icon_smile_thumb.gif "Thumbs Up [thumb]"){kind=icon}
Well I just got word that the car passed smog after the shop "fixed some small problems." Although I don't know what it was I am pretty sure that it wasn't the O2 sensor nor catalytic converter (thank god). So now I am wondering what could have been wrong when I got the test done. All that i know is that I am going to replace the O2 sensor as soon as I get the car back. ![[idea]](/images/smilies/icon_smile_idea.gif "Idea! [idea]")
Thanks for all of the help and the useful info Kirby. Maybe next time I should go find some 93 octane gas and pull a few extra burnouts to get the cat nice and hot. ![[burnout]](/images/smilies/icon_smile_burnout.gif "Burnout [burnout]")
So I guess that this was a $275 smog test for me. I am still fuming that the car hasn't lifed up to my expectations engine wise. Thanks again to every1 and sorry for the troubles.
Thanks for all of the help and the useful info Kirby. Maybe next time I should go find some 93 octane gas and pull a few extra burnouts to get the cat nice and hot. So I guess that this was a $275 smog test for me. I am still fuming that the car hasn't lifed up to my expectations engine wise. Thanks again to every1 and sorry for the troubles.