m3 bumper cover

Messages
165
Likes
0
Location
glyndon maryland
#2
I will sell you my old one w/ no hardware, and has a slight crack in it for $100. It is black but will need to be repainted. the crack is not visible once installed because it is on the under-side of the bumper. Also the foglight bracket mountings will need to be re-inforced to hold hold the brackets. Let me know......

cell 410 961 0435
email [email protected]
 
Messages
165
Likes
0
Location
glyndon maryland
#4
No it really isn'th that bad. The crack is not visible when mounted, and all you would have to do to fix it anyways would be to either staple it or fibergalls over top of it on the inside. And no the mountings for the brackets are not completely busted. all you would have to do to reinforce them would be to gut and drill out holes in little metal strips and glue them on maybe on either side of the mounting. Kind-of like surrounding the mounts. It would make them stronger. The reason they are weak is because the bumpers were not made very well and couldn't handle the everyday driving and all. Something must have hit my foglights a few times and made the mounts have hairline cracks in them, but they are not full cracks and do not go all the way through. Just let me know........I saw a used and damaged factory M3 front bumper that was completely torn in the front go for $150........so $100 def isn't a bad price, oh yeah, and it comes w/ all the trim. I Just don't have the airducts, foglight brackets, grille, or any of the mounting hardware. Yeah so let me know.

Patrick
 

jpizzle36

New Member
Messages
12
Likes
0
Location
San Francisco
#5
Thanks for explaining everything. do you know how much the shiping will cost? Im in San Francisco area code 94960. I can figure it out if you just give me the shiping wieght and your location.

thanks
JP
 
Messages
35
Likes
0
Location
Austin, TX
#8
$100.00 is a good price. I purchased on from ebay for around $89.00 with a small crack. I just laminated the back-side of the crack with fiberglass ( for reinforcement) and used body-filler on the crack on the visible side, sanded, primed, and painted. Came out great. The cool thing was 325 fog-lights fit right in the M3 bumper.
 


Top