I've done it before. YOu pop out the ashtray part (the part you would put loose change or cigarette ashes in). There is then one or two small screws (my memory fails me)on the bottom of the ashtray housing that need to come out. Once you unscrew, the houseing (the rest of the ashtray, with the door connected and your light bulb) will slip out by pulling up (towards your face). You then can then disconnect the lightbulb from the wire (at the bottom of the bulb) and with plyers (or maybe you're lucky and strong, and can get it without plyers) pull the bulb out by rotating it back and fourth (it doesnt have screw threads, it just needs to be loosened by elbow grease). Your bulb comes out, wha-la. Id check out the dealer by the way, or maybe even a car parts store like Advanced Auto (or something of the likings)